          Linksys WUSB11 Firmware Upgrade Utility
                  Release Date: 09/04/01
===========================================================
This utility will upgrade your present WUSB11 Drivers, Firmware
and Configuration Utility.  Post-upgrade versions will be:

Firmware:  0.90.0.2
Driver:  1.0.0.2
Configuration Utility: 2.90

===========================================================
NOTE:  Before upgrading the firmware, please install your Wireless
       USB adapter according to the instructions provided in your 
       WUSB11 User Guide.  The upgrade will not complete unless
       the adapter has been successfully installed on your computer.
===========================================================



Upgrading your WUSB11:
-------------------------------

1. Make sure your WUSB11 Wireless USB adapter is attached to your
   computer, and that your computer is on.

2. Double-click the [WUSB11UpgradeUtility.exe] file.  This file is
   saved in the location chosen during download. 

3. The Welcome Screen will prompt you to launch the InstallShield
   Wizard, which will help install the WUSB11 Upgrade Utility on your
   computer.  Click [Next] to continue.

4. Next you will be prompted to enter a destination for the utility
   files to be copied to.  You may edit the location or click [Next]
   to accept the default location and continue.

5. The firmware upgrade will begin automatically.  Upon completion
   you will see the Upgrade Utility screen which will show the status
   of the upgrade.  Software, Firmware and Configuration Utility
   versions will also be shown.  Click [Exit] to continue.  

6. To complete the upgrade process, you must disconnect and reconnect
   your WUSB11 adapter.  It should not be necessary to restart the PC,
   however if after reconnecting the WUSB11 you do not have network
   connectivity,  restart Windows to completely reset the adapter.
